BMTQZ - PUROLITE C-100 ION EXCHANGE RESIN
- MSDS: BMTQZ
- Manufacturer: THE PUROLITE CO
- Product Name: PUROLITE C-100 ION EXCHANGE RESIN
- National Stock Number: 4610-01-116-0501
Product Identification
Product ID:PUROLITE C-100 ION EXCHANGE RESIN
MSDS Date:01/01/1991
FSC:4610
NIIN:01-116-0501
MSDS Number: BMTQZ
Responsible Party
BALA CYNWYD, PA 19004
US
Emergency Phone: 215-668-9090
Info Phone: 215-668-9090
Cage: MO962
Contractor
Telephone: 215-668-9090
Cage: MO962
Ingredients
NON-HAZARDOUS FOR INGREDIENTS
Fraction By Weight: 100%
Hazards
LD50 LC50 Mixture:NOT REPORTED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE CONTACT, LIKE OTHER FOREIGN
BODIES, MAY CAUSE MECHANICAL IRRITATION OF THE EYE.
Explanation of Carcinogenicity:NONE BY THE MANUFACTURER.
Effects of Overexposure:EYE: LIKE OTHER FOREIGN BODIES, PARTICLES MAY
CAUSE MECHANICAL IRRITATION OF THE EYES.
Medical Cond Aggravated by Exposure:EYE CONTACT MAY CAUSE IRRITATION.
First Aid
First Aid:EYE: FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. CONSULT PHYSICIAN IF IRRITATION PERSISTS.
Fire Fighting
Flash Point:NO FLASH POINT
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:WEAR MSHA/NIOSH APPROVED, PRESSURE DEMAND,
SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:RESIN BEADS ON FLOOR MAY MECHANICALLY CAUSE
FLOOR TO BE SLIPPER. USE CARE TO AVOID FALLS. SWEEP UP AND TRANSFER
TO CONTAINERS FOR RECOVERY OR DISPOSAL.
Handling
Handling and Storage Precautions:KEEP DRUMS AND PLASTIC BAGS SEALED TO
PREVENT DRYING OR MOISTURE LOSS.
Other Precautions:STORE BELOW 49C (120F) AND ABOVE 0C (32F).
Exposure Controls
Respiratory Protection:NONE
Ventilation:LOCAL EXHAUST: NORMAL ROOM VENTILATION
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE STATED BY MANUFACTURER.
Work Hygienic Practices:CLEANLINESS IS RECOMMENDED.
Supplemental Safety and Health
PH AQUEOUS SLURRY 5 TO 7.
Chemical Properties
HCC:N1
Spec Gravity:1.32
pH:5-7
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER SPHERICAL BEAD WITHOUT ODOR
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH CONCENTRATED NITRIC ACID, OR STRONG OXIDIZING
AGENTS
Stability Condition to Avoid:AVOID TEMPERATURES >220C (428F)
Hazardous Decomposition Products:SO2, SO3, CO, CO2, STYRENE MONOMER,
DI-VINYL BENZENE
Disposal
Waste Disposal Methods:THIS MATERIAL CAN BE DISPOSED OF AS ORDINARY
TRASH.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.